• Home
  • /
  • Shop
  • /
  • KSE0SEC/23/72 (Stainless steel) IP rated outlet with security lid – 135mm x 135mm

KSE0SEC/23/72 (Stainless steel) IP rated outlet with security lid – 135mm x 135mm

KSEOSEC/23/72 ( Stainless steel) Single Socket  IP rated floor outlet with “Security” lid lock. Helps prevent unauthorised access to the power socket.
Typical installation areas include – Airports, Car Showrooms, Shopping Centres, Super Markets, Concourse areas. The top section is also available with a brass finish(71)- KSE0/23/71
Note the top section requires a seperate back box for either screed floor installations KGE170/23 or raised floors KGE170TF/23. If 2 boxes are required side by side in a raised floor application then also specify KGE270TF.

SKU: stainless-steel-ip-rated-outlet-with-security-lid Category:

KSEOSEC/23/72 Single Socket  IP rated floor outlet with “Security” lid lock
Typical installation areas include – Airports, Car Showrooms, Shopping Centres, Super Markets, Concourse

Areas and Outdoor Terrace/Deck areas.
• Sits flush to surrounding surface finish when fitted to Screed back box KGE/170/23
• Allen Key security lock opening
• Internal 45mm x 45mm mosaic aperture to accept mosaic socket ( UK 13amp- KSE4, UK 5 amp-KSE5, Schuko -KSE1 , US 110v- KSE6 )
• Internal surface plate slopes towards a weep hole at the rear of the box
• When in use unit meets IP20 rating. For additional strength the hinged lid is also supported on 2 pillars when in use
• Maximum load – closed 1000kg – open 170kg
• Top section must be used with the appropriate back box either Screed KGE/170/23 or Flange Supported KGETF/23
• The ACSE clip joins two or more KGE/170 back boxes to form a socket pod

Size: 135mm x 135mm Color: Stainless Steel (72) Brass (71)
Weight: 400g

Privacy Policy Cookie Policy