The GT044 cable grommet is designed as a small, neat and strong cable grommet solution. The 2 part grommet features a gasket seal which forms a tight air seal around cables and prevents dirt from entering the floor void. The grommet requires a simple 100mm square cut out. Its 2 part design with no outer housing means the unit could be installed in the edge of a floor panel without cables being “trapped” within the grommet or floor panel. This allows the panel to be removed without necessarily having to unplug cables. The built in locking arms hold the grommet firmly in position but also allow it to be easily removed when required.
Fitting is simple
- Pass cables through the floor panel cut out.
- “Snap” the 2 halves of the grommet together
- Position unit into the 100mm x 100mm floor opening
- Engage the quick action clamping arms
………….and that’s it!
- Made from flame retardant materials
- Point load tested up to 450kg without failure
- Fire rated gasket seal
- Supplied with strong safety lid
- Suitable for Data Centre and General Office Installation
- Suitable for edge of tile installation – No trapped cables!
- Overall Size –
- Cut Out – 100mm x 100mm
- Max. Cable Area – 50mm x 50mm
Air-Block® – the cool choice
Size: Cut Out – 100mm x 100mm